- Verify the IP address used by the internal web server on the Cisco ATA 186 through the IVR. In order to do this, select menu number 80#.
- From the PC, open a Web browser and enter this URL: http://<ipaddress_of_ata>/dev.
This window appears:
- Select the values for the items that you want to configure.
- Click apply to save your changes. The Cisco ATA 186 takes ten seconds to reconfigure itself. You need to reload the page before you can make any further changes.
- Close the web browser.
Tuesday, March 1
Configure the ATA by Webserver
Subscribe to:
Post Comments (Atom)
My CCIE#53599
My journey started in 2013 when I decided for a CCIE in voice. One never really knows what they are in for when starting down this r...
-
Hardware Platform Monitoring and Management The Appliance supports a variety of interfaces to enable monitoring in the following eight fo...
-
Configure This section describes the configuration of four call routing scenarios. Scenario 1 Call Flow: IP Phone 1 -- CME -- SIP...
-
Create backgroung image files Create two .png images one for the thumbnail and one for the real image. 1. For best results, re...
No comments:
Post a Comment